Description:

This is a pair of two 2 HP modules that allow you to connect a chain of controllers to your master through a standard 3.5 mm stereo cable (sometimes also called aux-cable). The usual idea is that you put all your Droid controllers into a skiff case and mount your master, X7 and G8 into another case, together with all your fancyEurorack sound modules.

While youcould do this with the typical 6-pin ribbon connector (e.g. the 80 cm version that we offer), using the R2M/R2C combination has some serious advantages:

• The connection cable can be almost arbitrary long (20 m have been tested and works perfectly).
• Since the connection is done on the front of the modules, you can quickly disconnect your skiff for the purpose of travelling to a gig.
• You can use a standard 3.5 mm stereo TRS cable for the connection.

These modules are not just passive connectors but contain special driver ICs that transform the electronic voltage levels, which run in the 6-pin ribbon, to something more stable and reliable that is fit for longer distances in a more hostile environment.

The controllers do notreceive their power from the master but from the R2C module, which has a power connector and a voltage regulator for that purpose. Each chain of the R2C module provides the same power to its controller chain as the master does (itcontains the identical voltage regulator). That means that you can connectup to 32controllers (!) to one R2C.

Anothernice thing: The R2M/R2C combination allows fortwo of these master / controller connections in parallel. That means that you can havetwo masters being attached to their individual controller chains. That doesnot mean, that each of the masters can access each of the controllers at the same time, however. Both master / controller connections work completely separately.

Package contents

1. One R2M module
2. One R2C module
3. One Eurorack power cable for the R2C
4. two 6-pin ribbon cables for connecting the R2M to two masters
5. two 3.5 mm stereo TRS cables, approx 1.2 m
6. 4 red M3 screws for mounting the two modules

CurrentDraw:
R2M:3 mA +12V |0 mA -12V |0 mA 5V
R2C: 2mA +12V |0mA -12V |0 mA 5V

Width: 2 HP
Depth: 13 mm

Link to R2M on ModularGrid

Link to R2C on ModularGrid

Image 1: Setup with one master

First let's assume that you