Description:

Marine Generator Control Module HSM300

HSM300 Synchronous Module is a special design for Genset automatic parallel. On the basis of the parameters, the module automatically tests the conditions of paralleling (pressure difference, frequency difference, and phase) and sends a parallel signal when the conditions meet parallel requirements.

• Power SupplyDC(8-35)V
• Case Dimensions71.6*89.7*60.7(mm)
• Operating Temp. (-25~+70)
• Weight0.2kg

CHARACTERISTICS:

1. Suitable for 3-phase 4-wire, 3-phase 3-wire, 2-phase 3-wire, single-phase 2-wire systems with frequency 50/60/Hz;

2. An adjustable potentiometer allows for setting the main parameters of synchronizing.

3. The operating parameters can be set via upper computer test software. LINK port should be connected to the upper computer via SG72 module (USB to LINK)

4. 4 relays output, 2 relays are used for UP output, DOWN output, 1 SYNC relay is used for sync close output, 1 STATUS relay is used for status output after the close;

5. 1 INH inhibit sync close output digital input, when the input is active and gens synchronize with the bus, the SYNC indicator will illuminate and sync close relay is inhibited to output.

6. One test button, test relay output, and panel indicators;

7. Widely power supply range DC(8~35)V, suitable to different starting battery voltage environment;

8. 35mm guide rail mounting;

9. Modular design, pluggable terminal, compact structure with easy installation.