Description:

iCAM462C camera uses a Sony IMX462 color sensor. The imaging area is 1/2.8", with 2.9um pixel size, 2.1MP resolution (1944*1096) and diagonal of 6.5mm.

iCAM462C camera has a very high sensitivity. It is an ideal camera for planetary imaging. The camera has a very low readout noise. The testing results indicated that the readout noise is as low as 0.73e at a gain of 350 and around 0.7e at a gain of 400. The camera has a unique DPS (Dead Pixel Suppression) technology to eliminate the any abnormal/dead pixel by analyzing camera dark frames. The camera has a unique HCG mode, which will automatically turn on when the camera gain setting is 80. The HCG mode can greatly reduce the readout noise and retain the same high dynamic range as it at low gain. Due to its unique QE response, the sensitivity reaches the peak at 800-850nm. An IR850 or CH4 filter can be used with the camera for infrared imaging.

When the camera is connected to the USB3.0 interface and full-resolution preview is used, it can reach 136 fps in RAW8 mode (10bit ADC). During image recording, the actual recording speed is affected by the hard drive writing speed. It is recommended to use a high-quality solid state drive to record data to realize the full benefit of the USB3.0 data speed. The ST-4 guiding port allows one to connect the camera to a mount GUIDE port for ST-4 autoguiding.

Manual iCAM462C Operation Manual Camera and ASCOM driver: iCAM Camera Driver iCAM ASCOM Driver

Specifications

Related products

-20%

★★★★★

NEEWER BASICS TP57 Selfie Stick Tripod for DJI Osmo Action 6/360/Nano

$28.70$35.88

-50%

★★★★★

20 in 1 Sports Outdoor Bundle + Free Cleaning Kit For GoPro HERO4

$42.50$84.99

-20%

★★★★★

NEEWER FL-L21 0.75x Wide Angle Lens Compatible with Insta360 Luna Ultra

$33.83$42.29

-50%

★★★★★

NEEWER ND/PL Filter Set For DJI Mavic 3 Pro/Pro Cine

$45.51$91.01