Description:

SuperX ELRS AIO 5-IN-1 Flight Controller Ultra-Compact 1S FPV Powerhouse

Take your micro FPV build to the next level with the SuperX ELRS AIO 5-in-1 flight controller a compact, high-performance solution designed for serious pilots who demand integration, reliability, and power in one board.

Key Features:

• MCU & Core: STM32F411CEU6 (100MHz, 512KB Flash), with integrated ESP32-PICO-D4
• Gyro Sensor: BMI270 with SPI connection
• Mounting: 25.5mm x 25.5mm pattern
• Power Supply: Supports 1S LiPo input (DC 2.9V4.35V)

Integrated 4-in-1 ESC:

• Rated for 5A continuous, 6A peak (3s)
• Factory firmware: Bluejay v0.19.2
• Protocol: DSHOT300 (Recommend Startup Min1100 / Max1200)
• Firmware Target: O-H-5 48KHZ
• BLHeliSuite programmable

Onboard ExpressLRS Receiver:

• Firmware: ExpressLRS v3.0
• Frequency: 2.4GHz
• Telemetry Output: <12dBm
• Protocol: Serial-based CRSF
• Packet Rates: 50Hz / 150Hz / 250Hz / 500Hz
• Firmware Target: HappyModel AIO 2.4GHz RX+VTX
• Compatible with ExpressLRS V3.x.x TX modules
• Supports firmware flashing via Wi-Fi

Integrated 5.8GHz VTX Module:

• Firmware: OPENVTX
• MSP VTX control with PIT mode support
• Channels: 40CH
• Power Output: 0 / RCE / 25mW / 100mW / 400mW
• Power Supply: DC 5V, <650mA (at 400mW)
• Antenna Connector: U.FL

Additional Sensors:

• Built-in voltage meter sensor (Scale: 110)
• Built-in current meter sensor (Scale: 1175)

Important Note:

If you click "Save and Reboot" from the Port tab in Betaflight Configurator and see "VTX Device Ready: False" in the Video Transmitter tab, simply power cycle the flight controller. The status will return to "True."

Port settings:

Receiver and telemetry settings: