Description:

Generac A0000069883 2099 Miswire Alarm Shunt Resistor. These resistors should be used when controllers are reporting a 2099 wiring error alarm due to stray AC voltage on the 194 and 23 wires. This can happen over long runs, or when the control wires are bundled in the same cable as other control wiring or the feeder.

Two of these resistors should be installed (at the generator side). One from 23 to 0 and one from 194 to 0. This grounds the excess voltage and cleans up the 12V signals on these wires.

These can be used on Evolution, PowerZone 410 (PZ410), PowerZone 200 (PZ200), and any other controller reporting a wiring error alarm due to excess voltage and 23 or 194.

Generac replacement parts will also usually fit the following Generac branded generators: Honeywell, Guardian, Siemens, Carrier, Watchdog, Centurion, Eaton & Bryant.

If you need Generac generator troubleshooting support, please visit our interactive forum