Description:

HGM180HC auto start module is an engine control module designed to control the engine via pushbuttons on the front panel or remote start signal. The module has 3 working modes to choose. When detecting faults, such as low oil pressure, high water/cylinder temperature, auxiliary alarm, over speed, it will disconnect fuel relay and energize to stop. LED annunciator displays the faults, which can offer real and effective alarm information.

Specific Data

• Display: LED
• Digital Input: 4
• Alternator Voltage: (15360)V(ph-N)
• Alternator Frequency: 50/60Hz
• DC Supply : DC(835)V
• Case Dimensions(mm): 84*72*35
• Panel Cutout(mm): 78*66
• Operating Temp.: (-30~+70)

PERFORMANCE AND CHARACTERISTICS

• 1.Wide range of DC power input;
• 2.With low oil pressure, high water/cylinder temperature, over speed protection and indication;
• 3.Charge fail warn, not shutdown;
• 4.With an additional auxiliary input signal, alarm to shutdown;
• 5.Speed signal is from power frequency;
• 6.LED displays all kinds of alarm states;
• 7.With run hour LCD display;
• 8.With fuel oil output, starting output, preheat output, shutdown output, common alarm/idle output, all relay output;
• 9.With the idle control function, idle delay time is programmable;
• 10.Preheat delay time is programmable;
• 11.Crank disconnect conditions can choose oil pressure + generator (factory default), also can choose only generator;
• 12.When dial the code switch to idle/high speed active, idle/high speed output can be configured, or it will be common alarm output.
• 13.Modular structure design, ABS plastic casing, embedded installation, compact structure with small volume, advanced SCU control, stable performance and convenient operation.