System type can set for: Mains (1#) & Mains (2#), Mains (1#) & Generator (2#), Generator (1#) & Mains (2#), Generator (1#) & Generator (2#).

Backlit 128x64 LCD, optional Chinese and English display, push-button operation.

Measure and display 2-way 3 phase Voltage and Frequency:

1# 2#

Line-Line voltage (Uab, Ubc, Uca) Line-Line voltage (Uab, Ubc, Uca)

Line-Nature voltage (Ua, Ub, Uc) Line-Nature voltage (Ua, Ub, Uc)

Frequency (F1) Frequency (F2)

Measure and display active power, apparent power, power factor, and 3 phase current;

Overcurrent alarm;

Over/under voltage, loss of phase, reverse phase sequence, over/under frequency protection.

Automatic/Manual mode. In manual mode, can force a switch to close or open;

All parameters can be set on site. Two different passwords which ensure authorized staff operation only.

During genset testing, the ATS controller can be set either on On-load or Off-load mode.

ATS Controller has the function of automatic Re-closing.

The closing output signal can be set as on intervals or as continuous output.

Applicable for ATS of one neutral position, two neutral positions, and change over.

Applicable for 2 isolated neutral lines for Generator and Mains.

Real-time clock (RTC).

The event log can record 99 items circularly.

The timely schedule can be set on a monthly or weekly basis and trial can be s