Description:

A redesigned PCB-mounted stabilizer built to eliminate wire play at its source. Its innovative pivot-based mechanism combines pivot rotation with wire sliding to prevent direct impact between the wire and stem, significantly reducing rattle, wobble, and unwanted noise while maintaining a smooth, consistent key feel.

The top-access screw-expansion retention clip combines the simplicity of clip-in mounting with the security of screw-in designs. Tightening the top-mounted support screw securely locks the stabilizer to the PCBwithout metal hardware contacting the board or interfering with O-ring mounting.

Each stabilizer is factory-tuned and pre-lubed at the required contact points, so its ready to install straight out of the box.

Specifications:

• Mounting Style: PCB
• Retention System: Clip-in base with top-entry screw-expansion retention clip
• Lubrication: Factory tuned and pre-lubed
• Compatibility: Accessories included for different PCB thicknesses and layouts
• 4 2U, 1 6.25U, 1 7U

Accessories:

• PTFE Stabilizer Pads: Improve mounting stability
• 1.2 mm PCB Shims: For 1.2 mm PCBs with non-split stabilized key layouts.
• 1.2 mm PCB Shims for Split Layouts: For 1.2 mm PCBs with split stabilized key positions.
• Stabilizer Stem Spacers: For stabilized keys using switches with a total travel of 3.6 mm or less.
• Screws 10
• Installation Screwdriver 1